Operating modes Press the MODE key to switch the control element between two operating modes. 1.Manual operation (LED MODE lights up) Only manual switch commands are carried out. The blind is moved as long as the UP or DOWN key remains pressed. If the key is tapped briefly, the blind moves to the end position. The blind can be stopped at any time by pressing the UP/DOWN key. Manual operation is possible for both operating modes.
2.Automatic mode (LED MODE doesn’t light up) The device ”remembers” manual switch commands and repeats them every 24 hours. An Up and DOWN command can be carried out every 24 hours ausgefuhrt warden. (e.g.07:00 hours UP, 20:00 hours DOWN) Manual operation is possible at all times and doesn’t affect the programmed switching times.
Programming switching times -Press UP or DOWN key to move the blind. -Press the MODE key for at least 4seconds while the blind is moving .the status LED flashes as long as the key is pressed. After the 7seconds, the LED goes out. The switching time is programmed. There must be an interval of at least 3 minutes (relay operation time) between any two programmed switching times.
Executing the switching times -Switch the device to automatic mode (MODE key) -The movement commands are repeated automatically every 24 hours.
Deleting all switching times Press all three keys for at least 4seconds to delete all programmed switching times